Lawn Mowers Video - removing a rear wheel from a ride on mower / lawn tractor

On By
Advertisement

Another video on ride on lawn mower wheels uploaded by bgm



06:01
removing a rear wheel from a ride on mower / lawn tractor

this is in response to a friend who asked how to get a stuck rear wheel of a ride on mower for this i use a 8 ton hydraulic hub puller 3/8" drive socket bar ...

- Click here to find the best information, offer
and deals on ride on lawn mower wheels


Click here to watch the video
from Youtube or to support the uploader.
Like This Post? Please share!
Subscribe through email and get Free updates

You May Also Like...

12 comments:

  1. umajunkcollectorJanuary 19, 2015 at 12:15 PM

    Great tip, and it worked great too! I had to use a 3"x3/8" drive socket
    extension because my puller's bolt was too big to fit in the wheel hole.
    Thanks so much for making this vid. YT to the rescue again! Don

    ReplyDelete
  2. Matthew ThomasJanuary 19, 2015 at 12:15 PM

    i waited that long just to see his set up! Can u make it any longer next
    time. Damn!

    ReplyDelete
  3. ? ?January 19, 2015 at 12:15 PM

    Thanks. One of my tiller wheels was frozen solid to the axle. Harbor
    freight had a pretty decent gear puller kit. Full kit, assorted puller
    bolts, bearing separator and all was under $30. It worked like a champ.

    ReplyDelete
  4. bgmJanuary 19, 2015 at 12:15 PM

    Thanks Dony look forward to more of your videos

    ReplyDelete
  5. jayla johnsonJanuary 19, 2015 at 12:15 PM

    yeah thats why im on here so i can help take the back tire off of the lawn
    mower and to help my grandaddy

    ReplyDelete
  6. Neil WhiteJanuary 19, 2015 at 12:15 PM

    Possibly could have been more boring, but don't really know how.

    ReplyDelete
  7. donyboy73January 19, 2015 at 12:15 PM

    good vid

    ReplyDelete
  8. ejflesherJanuary 19, 2015 at 12:15 PM

    Good video but I might recommend to viewers to watch the last minute or so
    to see the set up. I got the general idea and improvised my own pulley
    pulling system based off your idea here.

    ReplyDelete
  9. Arnoldo ResendezJanuary 19, 2015 at 12:15 PM

    where can I buy a hydraulic hub puller?

    ReplyDelete
  10. Emanuel LopezJanuary 19, 2015 at 12:15 PM

    I would like to know what is the tool called?

    ReplyDelete
  11. Mike VormwaldJanuary 19, 2015 at 12:15 PM

    Looks like the hub/rim was broken in the process which would then require
    welding...although seeing the checks in this tire, it would most likely go
    over the back fence.?

    ReplyDelete
  12. alpcatsJanuary 19, 2015 at 12:15 PM

    I am sorry... I did not see any hydraulics...?

    ReplyDelete

Powered by Blogger.